Alcon Brakes 6 Piston Brake Kit - Front - 2010-2020 Ford Raptor
- Fast and Free Shipping on orders over $99*
- Available Monday - Friday 6AM - 6PM PST
- No salesmen, Just Enthusiasts.
- Bizrate Circle of Excellence Winner
Ford SVT Raptor and F-150 Front Heavy Duty Brake kit. 6 piston calipers with 347mm x 36mm rotors. (13.6" x 1.4"). Fits 2010-2014 and 2017+ models
Alcon introduces the Ford SVT Raptor / F-150 Front Heavy Duty Brake Kit. This kit represents a substantial upgrade in braking performance and includes features not found in any other kit. HIgh temperature seals as used in motorsports applications, dust seals for performance in the worst conditions, and a low profile designed to fit under your OEM wheels. These kits include everything you need including calipers, adapters, spcers, hardware, and performance brake pads! The kit is compatible with your stock master cylinder AND parking brake.
- Ductile Iron Calipers - Provide maximum strength and stiffness with high resistance to fatigue and impacts. 15% reduction in pedal effort
- Larger/thicker rotors - Increased brake torque and larger thermal mass. 10% reduction in disc temp rise. Less brake fade
- Larger high friction brake pads - Increased stopping power and torque
- Epoxy acrylic paint - Maximum corrosion protection and a hot new look
- High temperature seals - Increased seal life and dust protection for maximum service intervals.
Worried about additional weight?
We frequently get questions about the weight of our off-road brake systems compared to stock and aluminum systems. The fact is that this aspect of the brake system is important, but not really a significant factor.
Looking at it two ways:
Power loss due to extra rotating weight is very small compared to the additional rotating mass if you have moved to 37" tires or heavy duty wheels. . The rotors are very near the rotation center of the wheel and will have a negligible impact, especially compared to the tires. A general rule of thumb we use in the racing world is that you lose about 1 HP per 7lbs. That means in order to lose 100HP you would have had to add 700 pounds of weight. Our total shipping weight is 140# including boxes, pads, material, etc.. If that’s even double the factory weight – it means you would have added 70#, losing about 10HP. That’s 2% of a modded Raptor power. The extra benefit of braking better and sooner adds 20% plus to your overall performance so your 0-60-0MPH times is dramatically better.
Where it DOES have a measurable impact is in the amount of energy the shock absorbers have to work with as they go over bumps. However what we found time and time again, and confirmed race engineers from a several pro racing teams (LeMans, Daytona, Grand-Am, etc) is that it is always better to have power, braking, and reliability even at the expense of some extra unsprung/rotating weight, because a good suspension can be tuned to work with that extra weight.
In the "old-days" when brakes and shock dampers were more rudimentary the additional weight was a very significant concern in these areas. …but in todays era of tunable suspension, shock dynos, shaker rigs, etc.. the weight of the discs is not really a factor that needs to be fretted over, it is simply accommodated.
Alcon Brakes 6 Piston Brake Kit - Front - 2010-2020 Ford Raptor fits the following vehicles:
- 2010 Ford F-150
- 2011 Ford F-150
- 2012 Ford F-150
- 2013 Ford F-150
- 2014 Ford F-150
- 2017 Ford F-150
- 2018 Ford F-150
- 2019 Ford F-150
- 2020 Ford F-150