Toggle Nav

BDS Suspension 3.5in Upper Control Arm Lift Kit - 2019 Ford Ranger

4-6 Week Lead Time

$1,178.97
SKU
BDS-1545H
- +
Share
  • Fast and Free Shipping on orders over $99*
  • Available Monday - Friday 6AM - 6PM PST
  • No salesmen, Just Enthusiasts.
  • Bizrate Circle of Excellence Winner

This new system builds off the factory mounting points and offers improved strength, ground clearance and suspension travel. The new ride height is the result of a combination top mounted steel fabricated strut spacer along with preload spacer for a total 3.5" of front lift. The reason for the combination is to achieve the correct ride height without increasing the overall extended length of the strut assembly too the point of causing premature wear of the CV axles and other front end components. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable Moog ball joints and Clevite rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5" systems is a small differential relocation to help further improve CV axle operating angle.

In the rear of these lift systems the factory leaf springs are retained and 1" lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8" steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5" lift kits are your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks for improved damper performance. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 3.5" UCA lift systems from BDS Suspension.

Tire & Wheel Combinations

  • 285-70 R17 w/Stock 17" and back spacing
  • 285-65 R18 w/Stock 18" and back spacing
  • 275/65r18 w/18x9 and 6.125" back spacing
  • *Trimming may be required*

Est. Installation: 4 hours

  • Difficulty Level (easy 1 - 5 complicated): 3

BDS Suspension 3.5in Upper Control Arm Lift Kit - 2019 Ford Ranger doesn't fit with any vehicle.

5.00 1