• Dual-rate coil springs front and rear guaranteed never to sag
• High-steer flip kit for proper steering geometry without a drop pitman arm and increased ground clearance over stock
• Stainless steel high-steer taper adapter eliminates drilling the factory knuckle
• All links and track bars utilize dual-rate bushings or PTFE-lined rod ends for tuned vibration isolation, controlled deflection, with maximum articulation and responsiveness
• Track bars are on vehicle adjustable designed for optimizing axle postion
• Includes high-performance rebuildable and revalvable reservoir 2.5 Series shocks
• 2.5 series shocks feature an internal bump zone for added bottom out control
• Out-handles most JK kits on the market both on and off-road
• Increased wheel travel and articulation over stock
• Level front to rear stance
• No welding or cutting required
• 100% returnable to stock
• 100% made in the USA

System Contains:

• 21000 - JK Rear Box Kit
• 21010 - JK Front Box Kit
• 21020 - JK Front Adjustable Track Bar
• 21025 - JK Rear Adjustable Track Bar
  
• 21036 - JK Front Upper Adjustable Link Kit
• 21031 - JK Front Lower Fixed Link Kit
  
• 21041 - JK Rear Lower Adjustable Link Kit
• 21046 - JK Rear Upper Fixed Link Kit
  
• 24010 - JK 4" Front Dual Rate Coil-Springs
• 24015 - JK 4" Rear Dual Rate Coil-Springs
• 27840 x 2 - Front ICON 2.5 VS Series Remote Reservoir Shocks
• 27745 x 2 - Rear ICON 2.5 VS Series Piggyback Shocks

Important Notes:

• Shocks are fully serviceable
• Front driveshaft can hit certain model skid plates at full droop and may need to be trimmed for full articulation
• 2 door models sit slightly higher than 4 door models, but remain level when installed
• Front drive shaft required for proper front driveline clearance (See Related Products Section Below)

ICON's 4.5" Jeep JK Performance Suspension Systems aims to strike a perfect balance between wheel travel, articulation, ground clearance, and precise on and off-road handling characteristics. With these goals met, ICON-equipped JK's can take on rolling desert whoops, crawl over obstacle-riddled trails, and drive back home in comfort all in the same day. One of the major benefits of the ICON 4.5" JK system (or any ICON system) is that they are comprehensive suspension solutions, not just "lift kits". As a complete manufacturer ICON is able to engineer and create shock absorbers, coil springs, link arms, track bars, and all associated parts to work in conjunction with each other and extract maximum performance out of the Jeep JK. The ICON Stage 3 Jeep JK 4.5" suspension system includes dual-rate coil springs, track bar drop brackets, high-steering components, bumpstop spacers, rear brake lines, rear sway bar links, complete set of front and rear links, and 2.5 Series reservoir shocks. Tested and tuned, the ICON JK Stage 3 suspension system offers stability and drivability over a wide range of off road terrains, while keeping a smooth onroad feel for every day driving. This system includes 2.5" remote reservoir shocks front and rear to ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. Installing this kit allows proper clearance for 35" tall tires with no modifications and 37" tires with aftermarket high clearance fenders. Aftermarket Tires: 35" x 12.50 Tall Tires (Larger Tires May Fit but Fender Trimming and Modification) Aftermarket Wheels: 9" WIDE WHEEL WITH 5" BACKSPACE Attributed Description: ICON Vehicle Dynamics; Suspension Lift Kit; Bushings Included: Yes; Coil Spring End 1 Type: Open; Coil Spring End 2 Type: Open; Grade Type: Performance; Meets or Exceeds Original Equipment Manufacture Specifications: No; Mounting Hardware Included: Yes; Shocks Included: Yes; Spring Color: Black; Spring Material: Steel; Dual Rate Coil Springs: Yes; Coils Quantity Front: 2; Coils Quantity Rear: 2; Maximum Lift: 4.5 IN Coils Quantity Front: 2 Coils Quantity Rear: 2 Dual Rate Coil Springs: Yes Maximum Lift: 4.5 OEM Wheels & Tires: Yes

ICON Vehicle Dynamics
4.5" Stage 3 Suspension System

2007-14 Jeep Wrangler JK

Overview:

ICON’s 4.5” Jeep JK Performance Suspension Systems aims to strike a perfect balance between wheel travel, articulation, ground clearance, and precise on and off-road handling characteristics. With these goals met, ICON-equipped JK’s can take on rolling desert whoops, crawl over obstacle-riddled trails, and drive back home in comfort all in the same day. One of the major benefits of the ICON 4.5” JK system (or any ICON system) is that they are comprehensive suspension solutions, not just “lift kits”. As a complete manufacturer ICON is able to engineer & create shock absorbers, coil springs, link arms, track bars, and all associated parts to work in conjunction with each other and extract maximum performance out of the Jeep JK.