S&B Replacement Filter - 2014-2020 Polaris RZR XP1000 / Turbo
Share
- Fast and Free Shipping on orders over $99*
- Available Monday - Friday 6AM - 6PM PST
- No salesmen, Just Enthusiasts.
- Bizrate Circle of Excellence Winner
S&B's Huge, Dry Cleanable Filter Flows The Best!
Using proprietary dry synthetic media, our RZR filter flows 6.56% better than stock and provides 10.53% more air than Donaldson's filter.
If you don't have our Particle Separator installed, than your filter will start to look pretty nasty after a couple rides protecting your engine. No worries though, our new RZR filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not re-use.
Step 1 - First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV's airbox and lightly tap the top serveral times on a hard service to knock out any debris, being careful not to bend the cage or pleats.
Step 2 - Blow out the filter from the inside out using the nozzle no closer than 1" from media. Continue to move nozzle taking care not to focus it on one specific area. Use an OSHA approved regulator at no more than 30psi.
Step 3 - Use the nozzle to blow out the outside of the filter an angle to remove any large debris that was not removed in Step 1 and 2. Be careful not to blow debris back into media. Than blow out once more from the inside out.
Optional Steps
If you want to maximize the airflow of your filter, we recommend completing the following steps every other time you service your filter.
Step 4 - Use a standard garden hose turned up to 75% its max strength and wash the filter from the inside out.
Step 5 - Wash the outside of the filter to remove any remaining debris. Repeat steps 4 and 5 until the media is returned close to its original white color. Allow the filter to dry before use. A small fan can be used to accelerate the process. Do not use hot air.
You should dispose of the filter after servicing it 10 times in order to ensure your engine is properly protected. Prior to you reinstalling your air filter, carefully inspect the cage, pleats and the silicone rubber for any damage. If you see any damage to the cage, pleats or rubber, DO NOT use the filter!
S&B Replacement Filter - 2014-2020 Polaris RZR XP1000 / Turbo fits the following vehicles:
- 2014 Polaris RZR XP 1000 EPS
- 2014 Polaris RZR XP 4 1000 EPS
- 2015 Polaris RZR XP 1000 EPS
- 2015 Polaris RZR XP 1000 EPS Desert Edition
- 2015 Polaris RZR XP 1000 EPS Fox Edition
- 2015 Polaris RZR XP 1000 EPS High Lifter Edition
- 2015 Polaris RZR XP 4 1000 EPS
- 2015 Polaris RZR XP Turbo EPS
- 2016 Polaris RZR XP 1000 EPS
- 2016 Polaris RZR XP 1000 EPS High Lifter Edition
- 2016 Polaris RZR XP 4 1000 EPS
- 2016 Polaris RZR XP 4 1000 EPS High Lifter Edition
- 2016 Polaris RZR XP 4 Turbo EPS
- 2016 Polaris RZR XP Turbo EPS
- 2017 Polaris RZR XP 1000 EPS
- 2017 Polaris RZR XP 1000 EPS Gold Matte Metallic LE
- 2017 Polaris RZR XP 1000 EPS High Lifter Edition
- 2017 Polaris RZR XP 1000 EPS Velocity Blue LE
- 2017 Polaris RZR XP 4 1000 EPS
- 2017 Polaris RZR XP 4 1000 EPS High Lifter Edition
- 2017 Polaris RZR XP 4 Turbo EPS
- 2017 Polaris RZR XP Turbo EPS
- 2018 Polaris RZR XP 1000 EPS
- 2018 Polaris RZR XP 1000 EPS High Lifter Edition
- 2018 Polaris RZR XP 1000 EPS Ride Command Edition
- 2018 Polaris RZR XP 1000 EPS Trails and Rock Edition
- 2018 Polaris RZR XP 4 1000 EPS
- 2018 Polaris RZR XP 4 1000 EPS High Lifter Edition
- 2018 Polaris RZR XP 4 1000 EPS Ride Command Edition
- 2018 Polaris RZR XP 4 Turbo EPS
- 2018 Polaris RZR XP 4 Turbo EPS Fox Edition
- 2018 Polaris RZR XP Turbo EPS
- 2018 Polaris RZR XP Turbo EPS DYNAMIX Edition
- 2018 Polaris RZR XP Turbo EPS Fox Edition