TeraFlex 2.5in Base Lift Kit - 2018-2021 Jeep Wrangler JL JLU

The ultra-simple TeraFlex Jeep Wrangler JL/JLU 2.5" Coil Spring Base Lift Kit w/ 9550 VSS Twin-Tube Shocks or Shock Extensions comes with the basic parts needed to fit larger tires for increased ground clearance for better off-road capability without compromising on road handling.

We recommend Falcon Performance Shocks or TeraFlex 9550 VSS shocks or shock extensions. These are the only shock absorbers engineered to work with TeraFlex lift coil springs to improve both compression and rebound for optimal vehicle stability. 2.5" Coil Spring Base Lift Kits are offered with TeraFlex 9550 VSS Twin-Tube Shocks or with shock extensions or without shock absorbers. Falcon Performance Shocks are available separately.

• Fits: 2018+ Jeep Wrangler JL/JLU
• Lift Height: 2.5"

• Sport/Sahara Fenders: 35" (w/ 3" front & 2.5" rear bump stops)
• Rubicon Fenders: 35" (w/ 2" front & 2" rear bump stops)
• Rubicon Fenders: 37" (w/ 2.5" front & 3" rear bump stops)

• 2.5" Lift Coil Springs (Front: TF-862002 & Rear: TF-1862102)
• Rear Track Bar Bracket (2.5-4.5" Lift) (TF-1953600)
• 2" Bump Stop Strike Pad Extension Kit (TF-1959500)
• 0.5" Bump Stop Strike Pad Shim Kit (TF-1959300)
• Longer 10.75" Front Sway Bar Link Kit (TF-744500)
• Longer 11.5" Rear Sway Bar Link Kit
• TeraFlex 9550 VSS Twin-Tube Shocks (2.5" Lift) (TF-1545250)
• All necessary hardware

• Caster correction recommended, but not required - NOT INCLUDED. Front Lower Sport Flexarm Kit (TF-1253000), or Front Control Arm Sport Brackets (TF-1938125), or 8-Arm Alpine [IR] Flexarm Kit (Alpine: TF-1416610 | Alpine IR: 1416510), and/or HD Forged Adjustable Front Track Bar (TF-1753420) recommended to optimize caster and pinion angles and restore factory steering and suspension geometry. Proper suspension geometry ensures all stability controls function w/in factory parameters.
• Requires aftermarket wheels w/ 4.75" backspacing or less - or Offset Wheel Adapters for stock wheels - NOT INCLUDED.
• Models w/ plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tires.
• Sport/Sahara Fenders require 3" front and 2.5" rear bump stop extensions and shims (included) in order to fit 35" tires.
• Rubicon Fenders require 2" front and 2" rear bump stop extensions (included) in order to fit 35" tires.
• Rubicon Fenders require 2.5" front and 3" rear bump stop extensions and shims (included) in order to fit 37" tires.
• Requires Shock Extensions (TF-1985200) or longer shocks (not included in base kit) - TeraFlex 9550 VSS Twin Tube Shocks (TF-1545250) or Falcon Performance Shocks recommended.
• Also available w/ Shock Extensions instead of shock absorbers as well as w/out Shocks or Shock Extensions (TF-1353002).

Install Time: 4 Hours

• JL 2-Door:
• 2.5" Spring Lift w/ 9550 VSS Shocks (TF-1354052)
• 2.5" Spring Lift w/ Shock Extensions (TF-1354012)
• 2.5" Spring Lift - No Shocks or Extensions (TF-1353002)
• JLU 4-Door:
• 2.5" Spring Lift w/ 9550 VSS Shocks (TF-1354050)
• 2.5" Spring Lift w/ Shock Extensions (TF-1354010)
• 2.5" Spring Lift - No Shocks or Extensions (TF-1354000)